Another ride to Glendora
 |
 |
 |
 |
 |
 |
 |
This Sunday’s bike club ride was our old route to Glendora. The main reason I wanted to do this was so we could stop in at the Gold Line station under construction in downtown Azusa and see the spot where Carla and I got to watch them thermite-welding the rails together last month. I was curious to see what the weld looks like now that it’s cooled and finished.
Right away, Michael got a flat before we’d even gone one mile. So we stopped and fixed that. A little while later, when we got on the San Gabriel River bike trail. There, I ran over something and I got a flat, too. After fixing that, we headed into Azusa and rode to the train station. We found the weld, nicely finished, and with writing on the side of the rail, recording who did it and when it was done. Rooting around in the ballast around there, we found some small chunks of slag from the ceramic mold and casting sand they used to make the form around the weld. We also found some chunks of what was essentially cast iron, from the excess molten metal that came out the sides of the mold during the welding process.
Continuing on, we rode into Glendora, where we stopped for coffee and snacks at Classic Coffee. Then we headed back by way of Cypress Ave, passing the Huy Fong Foods hot sauce factory in Irwindale, before riding over Santa Fe Dam to get back to the bike trail. And at that point, Michael got yet another flat. After fixing that, we figured it was probably best to just head home by the most direct route possible.
